OP-045

Name: OP-045 PCI OPTO DIO48 SOURCE - Brainboxes
SKU: OP-045
Availability: InStock

PCI OPTO DIO48 SOURCE

Discontinued

This PCI version of the DIO 48 card provides 48 TTL digital output lines. Two 8255 compatible programmable peripheral interface chips, with TTL buffered output, give a total of six 8 bit ports. These 48 i/o lines with 1 ground and one +5V/GND selectable output line are accessible from the 50 way D edge connector. Each port can be pulled high or low by optional on-board resistor networks. All 8255 modes are fully supported, the ports can be programmed in many i/o combinations, several with interrupt capability. Supplied with Quanta 2000 device drivers and Active X control. Active X controls allow easy data capture directly into any Active X enabled application. e.g. HPVEE, Labview, Microsoft Excel. Supplied complete with sample source code and online documentation.

IO Channels
IO Channels	IO Protocols	DCON ASCII over TCP or Com Port
	Description	16 Digital Inputs and 16 Digital Outputs
	Watchdog	When device comms is lost, outputs can be set to predetermined state
	Power On Values	Outputs can be set to predetermined values on power on
	Safe Values	N/A
Serial Port
Serial Port	Opto Isolation Rating	2,500V
Serial Port Settings
Serial Port Settings	External Power In	17.5 - 35V, 24V Nominal
	Output Drivers	UDN 2989
	Input Level Low	0.0-2.4 Volts
	Input Level High	2.4-24.0V
	Max Currents	-one input high: 7.25mA @ 24V, -all inputs high: 150mA
Power
Power	Max Input	35 Volts
General
General	Galvanic Isolation	Yes
	Power Consumption	awaiting
	Product Weight	awaiting
	Product Dimensions	awaiting
	Packaged Weight	awaiting
	Packaged Dimensions	awaiting
	GTIN (barcode)
Operating System Compatibility
Operating System Compatibility	Operating Systems	Microsoft Windows 98 Microsoft Windows NT 4.0 Microsoft Windows 95 Microsoft Windows 3.x DOS
Interface
Interface	ISA	Industry Standard Architecture